Qlink Wireless is one of the most popular nationwide Lifeline and Affordable Connectivity Program providers in the country. It offers free government cell phone service with unlimited talk, text, data, and eligible customers may also receive a new tablet.
Qlink is a mobile virtual network operator (MVNO), which means that it doesn’t have its own network towers, but uses the towers and the network of another carrier instead. Qlink is powered by T-Mobile’s network, which offers a nationwide 4G coverage and the largest 5G coverage in the U.S. As such, it would be a shame for Qlink customers not to be able to use these high network speeds.
In order to ensure that you will be able to connect to Qlink’s 4G and/or 5G network, you must set up your device with the right APN settings. In this article, we will take a closer look at the Qlink Wireless fastest APN settings and help you make sure that you get the most out of your Qlink experience.
In case you also need information What Network Does Q Link Wireless Use
What Are the APN Settings on the Phone?
APN is an acronym that stands for Access Point Names. APN settings are the configuration settings that your mobile device needs to connect to the carrier’s network. Qlink’s subscribers need Qlink’s APN settings to connect to the carrier’s 4G and 5G networks.
The APN settings differ between service providers and phone models. For example, APN settings for iPhones are different from the ones for Android or Windows phones. Therefore, it is vital to set up the right APN settings for your device in order to connect to the network successfully.
Note: The APN settings will only work if you type in the details exactly as you see them in the following sections below. Make sure to mind the capital versus small letters, dots, slashes, other symbols, and spaces. If the field is blank, make sure to leave it blank yourself.
If Qlink Data is Not Working on Your Mobile Phone, What Should You Check?
In case your Qlink data is not working properly on your mobile device, you should check the following:
- Check if your phone is connected to Qlink’s network.
- Make sure that your Mobile Data option is turned on (you can see this option by swiping down the notification bar).
- Make sure that you have a valid mobile data plan. Do so by logging into your Qlink account or contacting the company’s customer support service.
- Make sure that you have not reached your data limit. If you have, you won’t be able to use your monthly data. Instead, you can connect to Wi-Fi.
- Make sure the device is not in airplane mode.
- Restart your network by restarting the phone or turning the airplane mode on and off. You can also reset your network settings via the Settings option.
- Try turning off your phone and re-inserting your SIM card. If the SIM card wasn’t placed properly, your device was unable to get the network or use the data.
- Change your APN settings. See how in the following sections.
- If the issue persists, make sure to contact Qlink’s customer support service and explain the situation.
How to Fix Qlink Data Not Working Issue on Your Android Phone?
In order to fix the Qlink data not working issue on your Android device, you must reset your current APN settings to the default ones. After restoring to the default Qlink network settings, make sure to restart your phone.
Qlink 5G Fastest APN Settings for Android Phone
As mentioned before, APN settings vary between carriers and phone systems. In order to configure your Android phone (regardless of whether you own a Samsung phone, Motorola, LG, Nokia, etc.), follow these simple steps:
- Take your phone and go to Settings.
- Select Connections and then Mobile Networks.
- Choose the Access Point Names option.
- Press the + or three dot symbol to reset to default.
- You can also press Add to add new APN settings.
- Fill out the fields as you see below:
- Name: QLink
- APN: qlink
- Proxy:
- Port:
- Username:
- Password:
- Server: N/A
- MMSC: http://wholesale.mmsmvno.com/mms/wapenc
- MMS Proxy: N/A
- MMS Port: N/A
- MCC: 310
- MNC: 240
- Authentication Type: N/A
- APN Type: default, supl, MMS
- APN Roaming Protocol: IPv4/IPv6
- Enable/Disable APN: APN Enabled
- Bearer: Unspecified
- APN Protocol: IPv4/IPv6
- MVNO Type: N/A
- MVNO Value: N/A
Note: If the field is blank above, make sure to keep it blank.
Once you have typed in the data above, save the settings, and restart your phone. Afterward, check your network connection and data. Now, everything should work fine.
How to Apply Qlink 5G APN Settings on Android Phone
To apply Qlink 5G APN settings on your Android phone, follow the instructions in the previous section. To shortly sum up:
- Launch your Settings app.
- Choose Connections and then Mobile Networks.
- Choose the Access Point Names option.
- Press the + or three dot symbol to reset to default.
- You can also press Add to add new APN settings.
- Fill in the settings with the details provided in the previous chapter.
- Save the settings and restart your phone.
- Turn on your phone’s data.
Qlink 5G Fastest APN Settings for iPhone
To configure your iPhone APN settings (regardless of which iPhone model you have), follow these prompts:
- Go to Settings.
- Select the Cellular option.
- Press Cellular Data Network and enter the following details:
- APN: qlink
- Username: N/A
- Password: N/A
- MMS Proxy:
- MMSC:
- MMS Max Text Size: 1048576
- MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
Note: If the field is blank above, make sure to keep it blank.
Once you have entered the data above, save the settings, and restart your phone. Doing so should activate the new settings.
How to Apply Qlink 5G APN Settings on iPhone (iOS) Devices
To apply Qlink 5G APN settings on your iPhone phone, follow the instructions in the previous section. To shortly sum up the process:
- Launch your Settings app.
- Choose the Cellular option.
- Press Cellular Data Network.
- Key in the APN details listed in the previous section.
- Save the settings.
- Restart your iPhone.
- Turn on your phone’s data connectivity.
Qlink Wireless Fastest APN Settings for Windows Phones
To change your Qlink APN settings on your Windows phone, follow these quick and easy steps:
- Go to Settings.
- Select Network & Wireless.
- Choose the Cellular & SIM option.
- Press Add Internet APN.
- Type in the following APN details:
- Profile Name: QLink
- APN: qlink
- Username: N/A
- Password: N/A
- Type Of Sign In Info:
- IP Type: IPv4
- Proxy Server:
- Proxy Port:
- Then, enable the Use this APN for LTE & Replace the one from my phone option.
- Go to Properties.
- Press the Add MMS button.
- Enter the following MMS settings:
- MMSC: –
- MMSC Port: –
- Maximum MMS Size: 2048
Note: If the field is blank above, make sure to keep it blank.
Afterward, make sure to save the settings, and restart your phone. Doing so will activate the new settings.
Qlink Wireless Fastest APN Settings for Blackberry
If you wish to set up your Qlink APN settings on your Blackberry phone, follow the instructions provided below:
- Go to Settings.
- Select Network Connections.
- Choose Mobile Network.
- Press the APN button.
- Add new APN settings by entering the following data:
- APN: qlink
- Username: N/A
- Password: N/A
Save the new settings and restart your phone. The settings will be activated automatically.
Qlink Wireless Fastest APN Settings for Tablet
In addition to free Lifeline and ACP monthly services, Qlink’s Affordable Connectivity Program-eligible customers can also receive a one-time ACP discount of up to $100 to purchase a tablet. According to government rules, the customer must pay at least $10.01 to receive the discounted device.
If you have received a discounted Qlink tablet and you wish to reset its APN settings, make sure to:
- Follow the Qlink 5G Fastest APN Settings for Android Phone process if you have an Android tablet.
- Follow the process described under Qlink 5G Fastest APN Settings for iPhone if you have an iOS tablet.
- To reset your Windows tablet, follow the instructions in the section Qlink Wireless Fastest APN Settings for Windows Phones.
Depending on the kind of tablet you have, make sure to follow the right instructions. If you have any issues or questions, contact Qlink’s customer support service.
Qlink Wireless MMS Settings for Android Devices
MMS is another acronym that you have probably heard before. It stands for Multimedia Messaging Service and it enables us to send multimedia messages that include photos, GIFs, short videos, etc. MMS messages allow us to send multimedia messages from a mobile device using the mobile network.
You can set up your Qlink Wireless MMS settings for Android on the same page where you have configured the APN settings. Doing both will set up your Qlink APN internet and MMS.
In order to successfully receive and send MMS messages on your Android phone, make sure that the APN, MMSC, and APN Type are set up correctly.
Qlink Wireless MMS Settings for iPhones
You can set up your Qlink Wireless MMS settings for your iOS-powered device on the same page where you have configured the Qlink APN settings for your iPhone. Doing so will enable you to use the MMS feature on all your iPhone and iPad models.
In order to successfully receive and send MMS messages on your Android phone, follow these steps:
- Go to Settings.
- Choose Cellular.
- Press Cellular Data Network.
- Enter the following settings under the MMS section:
- APN: qlink
- Username:
- Password:
- MMSC: http://wholesale.mmsmvno.com/mms/wapenc
- MMS Proxy:
- MMS Max Message Size: 1048576
- MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Note: If the field is blank above, make sure to keep it blank.
Then, you can set up your Qlink APN internet settings as well. Save the settings and restart your iPhone.
You can read one of our past articles Latest Qlink Wireless Compatible Phones
Qlink Wireless Personal Hotspot Settings for Android Devices
When it comes to your Qlink personal hotspot settings for Android devices, there is not much to say as the process has nothing to do with the device’s APN settings.
If, however, you wish to turn your mobile hotspot on, you can follow these steps:
- Go to Settings.
- Select Connections.
- Press Mobile Hotspot and Tethering.
- Enable the Mobile Hotspot if it is turned off.
Alternatively, you can swipe the main notifications bar down, and there, you will see the Mobile Hotspot shortcut. Long-press this button, and there, you will be able to set up your network name, password, band, and more.
Read more about qlink hotspot Does Qlink Wireless Have Hotspot
Qlink Wireless Personal Hotspot Settings for iPhone
You can create a personal hotspot on Qlink’s iPhone and iPad devices of all models. To do so, follow these steps:
- Go to Settings.
- Select Cellular Data or Mobile Data.
- Scroll down to Personal Hotspot and enter the following details:
- APN: internet
- Username:
- Passwords:
Note: If the field is blank above, make sure to keep it blank.
Qlink Wireless Automatic Network Configuration on Android Devices and iPhone
To allow your Android device to automatically configure your Qlink Wireless APN and MMS settings, follow these simple prompts:
- Go to Settings.
- Press System.
- Choose Reset Options.
- Then, press Reset Wi-Fi, mobile and Bluetooth.
- Finally, tap on Reset Settings.
- Reset the network settings.
You can also reset your Android network settings by deleting APN settings. Then, restart your device without a SIM. Finally, insert the SIM card and restart the device once more.
To allow your iPhone to automatically configure your Qlink APN and MMS settings, reset your network settings. To do so make sure to:
- Go to Settings.
- Press General.
- Choose Transfer or Reset iPhone.
- Select Reset.
- Finally, click Reset Network Settings.
- Enter your password and your iPhone should automatically configure Qlink Wireless network settings.
Will Using Qlink APN Settings Help to Improve My Internet Connection?
You may be wondering whether or not using Qlink APN settings may help improve your internet connection. The answer is yes! Using the Qlink Wireless fastest APN settings will not only help improve your internet connection, but it will also provide you with higher data speeds, 4G or even 5G network, reduce the call interference, improve the signal, and much more.
How to Reset Networking Settings?
The process of resetting networking settings depends on the type of your device (Android, iOS, Windows, etc.). Nevertheless, you can usually reset these settings by going to the Settings app and pressing Network, Connection, or Cellular Data Network. There, you will find the option to reset. Confirm it and restart your phone.
What if Qlink Wireless Internet Settings Don’t Work for You?
In case the provided Qlink Wireless internet settings don’t work for you, make sure to contact Qlink’s customer support service as soon as possible.
Is Using APN Settings for Qlink Wireless Safe?
Yes. Applying the Qlink APN configuration details provided above is completely safe.
Where Are APN Settings Stored?
Many customers wonder if the APN settings are stored on the SIM. The answer is no. They should, however, be included in the package that came with your prepaid SIM card. If that is not the case, search for them online or by contacting your wireless provider.
Does Changing APN Settings Affect Internet Speed?
Changing APN settings does not affect internet speed directly. However, it enables you to connect to your carrier’s network and connect to the higher network speeds seamlessly. As such, the correct APN settings may enable you to connect to higher network speeds, such as 4G LTE and 5G, and thus offer you higher network speeds indirectly.
Why Does My APN Sometimes Not Work?
In case your APN settings don’t work, you should check whether or not you have entered the exact correct details. If not, make sure to correct any mistakes that you’ve made. Also, make sure that you have saved the new APN settings and restarted the device afterward. After your phone has been restarted, make sure to switch to the highest network mode supported by your phone (4G or 5G) and that the network mode is set to automatic. If nothing works, contact Qlink’s customer support service.
Does Qlink Have VPN?
Qlink Wireless does not have a built-in VPN. Nonetheless, you can install a third-party VPN to secure your usage. Choose one that is compatible with all your devices and allows you to encrypt all the data on your Qlink network.
How to Set Up Qlink Wireless VPN?
To set up the Qlink Wireless VPN, find a reputable VPN service. Download the VPN and install the app. Press the power button in the app to connect to a VPN server. For Qlink, it’s best to use a server from the U.S.
What is Wi-Fi Dongle Setting?
A Wi-Fi Dongle is a plug-and-play device that enables you to access the internet while you are traveling. To set up the Wi-Fi Dongle settings, go to Settings, Profile Management, and enter the following details:
- Profile Name:
- APN: qlink
- Access number: *99#
- User name:
- Password:
